 |  |  |  |
 |  |  |
HSN 500 Saw Accessory Page
| | | |
| | |
HSN 500 Saw Accessory Page
 | Top Stand Plate Part # HSN500 SP (fits both models)  $23.00
Both notchers can be mounted on a stand and use a 1/2 inch hand drill to power the unit. We offer a machined top stand plate and a set of plans, so it will be easy to fabricate the stand if this is the way you would like to mount it. |
| ||||||||||||||||||||||||||||||||||||||||||
 | The "Tube Spider" IT GIVES YOU THE RIGHT BITE EVERY TIME! Circular Profile Gage for the perfect Notch. Made from aircraft aluminum with stainless steel pins. Thumb screw for positive positioning on tubing. DIRECTIONS: 1. Push all the pins flush with the body of the Tube Spider. 2. Install Tube Spider on end of tube. * 3. Push pins forward slowly, one at a time, to get an accurate contact. 4. Slide the Tube Spider back on the tube to be cut and use marker to connect the dots. (Like the kid's game!) 5. Use your choice of cutting tool to follow the marker line. NO! NO! The pins are long & small in diameter to get into extremely tight places. Do NOT try and use this like a dagger! The pins will distort and you will not get the accuracy that you need. If you DO bend the pins or break the retention o-rings, stainless tig rod and a visit to the parts store will provide replacement parts. *On a long span, clamp a piece of mig wire or a straight edge to extend your reach. ALL SIZES LISTED ARE TUBING SIZES!!! Other Tube and Pipe Sizes by Special Order. TS-1 TUBE SPIDER 1" $60.00 TS11-2 TUBE SPIDER 1 1/2" $65.00 TS15-8 TUBE SPIDER 1 5/8" $65.00 TS13-4 TUBE SPIDER 1 3/4" $65.00 | |||||||||||||||||||||||||||||||||||||||||||
 Preferred High Quality bi-metal hole saws
| ||||||||||||||||||||||||||||||||||||||||||||
Tools may be a different color than the web site shows, the color difference is designed to enhance the viewing experience on-line.
Pro-Tools reserves the right to make design changes without notice.
Copyright 2005 Pro Tools, Inc
